WATER EFFICIENCY CERTIFICATION FORM

USE THE FOLLOWING PROCEDURE FOR CONDUCTING A WATER EFFICIENCY TEST AND SENDING THE REPORT/CERTIFICATE TO CUSTOMER.

MAKE SURE YOU HAVE YOUR FLOW TEST CUP AND BUCKET TO TEST THE FLOW RATE OF THE FIXTURES.

Quote work through FLATRATENOW by using task WELS001 Water Efficiency Certification Test

Once customer accepts quote you can conduct the Water Efficiency Test.

You are checking the following:

-Premises is individually metered (you will need to enter the water meter reading)

-All cold taps except for bath tap and appliance taps do not exceed 9L/min (check the instructions on the flow cup for how to test the flow rate)

-All toilets are dual flush.

Follow the next instructions for how to fill out the form.

You will need to create a new folder for the specific property you are testing.

Rename the folder name as the property address.

You can’t put / in for apartments so just use a comma , to separate the unit number from the road number.

Copy the template file to the new folder you have created.

Click into the folder to find your copied file.

Rename the file as MPAQ Water Efficiency Certification Form QLD - (your property address)

Next you will need to sign the file by opening it through the ‘Add Text or Signature’

Resize your signature to suit the box.

Next, open the signed file in ‘Adobe Acrobat Reader’ and fill out the form.

If servicem8 does not open this screen, you may need to open the corresponding job in servicem8 that you need to attach the file to. This seems to be a small bug in the app. DEAL WITH IT.

IF YOU THINK THAT THERE’S ANY INFO MISSING THAT COULD MAKE THIS EASIER TO FOLLOW JUST CHUCK IT INTO THE MESSAGE BELOW AND WE’LL MAKE SURE WE GET THIS RUNNING AS SMOOTH AS POSSIBLE